RAMP2W10-1154D |
size: 4.9" w x 4" tall x 1" deep
click here to CONTACT
Qintar |
8 dB 4-Output 1 GHz Cable Spec®
2-Way CATV Amplifier
With ACTIVE Return Path |
DIGITAL TV READY |
|
These new Cable Spec® RAMP2W10-1154D
amplifiers offer an active 8dB gain per port forward path and an
active 2.5dB gain per port return path for today's new multimedia
CATV systems. The active return path allows digital signals from
the customer's phone, fax, modem, or computer to travel from the
customer's home back to the CATV head end for processing. Our PC
Boards are made with SMT manufacturing and have capacitance protection
for surges up to 6kV. The high isolation waterproof case guarantees
clean signals from the home in the reverse path bandwidth. Four
outputs allow for up to four TVs to be run from the cable input.
These units are powered by either the DC port or the RF output port
#1 using a power inserter (optional). Meets S.C.T.E. & Cable
Labs specs. |
|
Features:
- 6 kV surge protection
- High RFI shielding
- Constant level of gain
- "F" connector power supply
- Active 10dB return path
- Waterproof case with 4 outputs
- 8 dB of gain after splitter losses (forward)
- Meets all SCTE Specs
- LED power-on indicator
- 5 YEAR WARRANTY
|
Specifications:
| | Forward | Reverse | | Bandwidth | 54-1000 MHz | 5-42 MHz | | Gain | 7.5 dB ± 1.5 (per port) | +3 dB | | Flatness Passband | 1.5 dB | 1.5 dB | | Rated Output Level (max) | 15.5 dBmV (160 Channels, 6MHz each) | 60 dBmV | | Noise Figure @ 70 F (max) | 3 dB | 3 dB | | Return Loss min. | 18 dB | 18 dB | | Dist. X-Mod. min. | <-75 dBc | <-75 dBc | | CTB min. | <-79 dBc | <-79 dBc | | CSO min. | <-62 dBc | <-62 dBc | | Hum Modulation | <-75 dBc | <-75 dBc | | Nominal Impedance | 75 Ohm | 75 Ohm | | Group Delay | <20ns/3.58Mhz @54-76MHz | <10ns/1.5Mhz @5MHz | | Group Delay | <5ns/3.58Mhz @76-100MHz | <30ns/1.5Mhz @40MHz | | RFI Shielding (dB) min. | 130 | | Power Consumption | 110VAC/6W | | Transformer (included) | 12VDC/500mA (175 mA consumption) |
Specifications subject to change without notice. |
|
 |
 |
PS-110V Transformer
U/L Listed (included)
(220V optional) | PI-1 Power Inserter
(optional) |
|
|
Home Page: www.Qintar.com
Qintar Technologies, Inc. • 31352 Via Colinas, Suite 104, Westlake Village,
CA 91362-6808
Toll Free: (800) 497-3910 / Ph: (818) 991-7300 / Fax: (818) 889-7400
E-Mail: Sales@Qintar.com
For
Business Customers Only. We do not sell directly to the Public. |
|
|
|
Copyright © 2001, Qintar Technologies, Inc. All rights reserved. |