RAMP2W-1158

RAMP2W-1154A
size: 4.8" w x 3" tall x 1.5" deep
click here to CONTACT Qintar

4 dB 8-Output 1 GHz Cable Spec®
2-Way CATV Amplifier
With Passive Return Path

 DIGITAL TV READY 

The Cable Spec® “Space Saver” RAMP Series 8-Port, 2-Way Drop Amplifier is a practical addition to our line of superior products. The “Space Saver” case is half the size of competitors’ and helps to reduce added costs. The passive return path allows digital signals from the customer's phone, fax, modem or computer to travel from the customer's home back to the CATV head end for processing. The high isolation solder-back case guarantees clean signals from the home in the reverse path bandwidth. These units are powered by either the DC port or the RF output port #5 using a power inserter (optional).

Features:

  • Ultra Low Noise
  • High RFI shielding
  • Virtually constant level of gain
  • "F" connector power supply
  • Passive return path
  • 1 GHz bandwidth
  • Solder-back case with 8 outputs
  • 4 dB of gain per port
  • On/Off LED
  • 5 YEAR WARRANTY

Specifications:

Bandwidth
Forward:
54-1000 MHz
 
Reverse:
5-42 MHz
Gain (dB) after splitting loss:
Forward:
+4 ± 1 min.
Loss (dB)
Reverse:
 -12 ± 1 max.
Flatness Passband (dB) max.:± 1.0
Return Loss (dB) min.:16
Noise Figure (dB) max.3
RFI Shielding (dB) min.:130
Port-to-Port Isolation (dB) min.:25
Dist. X-Mod. (dB) min.:-65
CTB (dB) min.:-70
CSO (dB) min.:-60
Max. Out (dBmV):+15
Power:110VAC/6W
Transformer (included):12VDC/500mA
Power Inserter:Optional
Port Configuration:Vertical
Channel Capacity:151

Specifications subject to change without notice.
 

  PI-1 Power Inserter
PS-110V Transformer
U/L Listed (included)
(220V optional) 

PI-1 Power Inserter
(optional)

Home Page: www.Qintar.com

Qintar Technologies, Inc. • Westlake Village, CA USA
Ph: (818) 991-7300

E-Mail: Sales@Qintar.com

For Business Customers Only. We do not sell directly to the Public.

 


Copyright © 2009, Qintar Technologies, Inc. All rights reserved.