HT-200, HT-2008
8" (203mm)
STANDARD TYPE
HT-200R, HT-2008R
8" (203mm)
RATCHET TYPE |
| FOR CRIMPING MODULAR
PLUGS | | HT-200 | 10P10C & 8P8C/RJ-45,
6P6C/RJ-12, 6P4C/RJ-11, 4P4C &4P2C PLUGS | | HT-200R | | HT-2008 |
DEC/OFF-SET PLUG-6P6C
8P8C/RJ-45, 6P6C/RJ-12, 6P4C/RJ-11, 4P4C
& 4P2C PLUGS & DEC/OFF-SET PLUG-6P6C | | HT-2008R |
Use with HT-501Afor stripping UTP/STP wire
 |
- Smooth motion and precise crimping.
- Cuts, strips and crimps all kinds of modular
plugs WITHOUT CHANGING MODULAR (DIE) SET.
- Two in one for crimping solid and stranded
wire.
- Works with all standard plugs: AMP, SS,
AT&T licenses, etc.
- Model HT-200/200R is designed with 10
position punches. For crimping 8P8C plug
please use the AMP 8P8C Plug with 2 cavities
on each side as shown in Fig. 1.
- There is a length guide for stripping
to 6mm. Insert 4P or 6P into zinc plated
length guide then squeeze handles and pull
wire out to achieve correct stripping. Cutting
blade is set at 12mm. Insert 8P or 10P conductor
wire over cutting blade so that the tool
cuts and strips at the same time.
- Model HT-2008/2008R is designed with 8
position punches. For crimping ordinary
8P8C plug, which has no additional cavity
on each side, as shown in Fig. 2.
- HT-200/200R/2008/2008R parts are made
of metal to be rigid and durable.
- Built-in cutter on rear side and stripper
on front.
- For stripping solid telephone wire Model
HT-S501 is effective and recommended.
- To adjust the 6P guide for crimping use
a “flat” screwdriver to set the
guide to right hand side for crimping normal
6P plug or to the left hand side for crimping
DEC plugs.
|
|
|
